💡 Tip: The following article data is for reference only. Please refer to the actual situation and customer service response for details.
The Zyber 8G series is a new 10 Th+/s miner redesigned by TCH engineers, based on the Zyber 8S framework and a multi-ASIC chip architecture. The Zyber 8G Premium is a quiet lottery machine that embeds 8 BM1370 chips on a 6-layer reinforced PCB, pushing the chip's computing potential to the extreme. Of course! It is also the flagship miner under the same chip category, the third well-known series after Bitaxe and Nerdqaxe.
What is Zyber Miner📌
Understanding Zyber Miner is simple: it's a screening and upgraded BTC Miner series by TinyChipHub Studio! As more miners flood the market with varying quality, a series distinct from other brands, pursuing high quality, was specifically established. TinyChipHub's original intention was to build a BTC Miner community for geek friends to communicate, not just a store. The Zyber 8G is not some mysterious money printer; it is essentially a dedicated computer performing a single mathematical task, running the SHA-256 hash algorithm at full capacity to secure the Bitcoin network while occasionally checking if it can hit a "Block Found".
Take this Zyber 8G, already perfected by TinyChipHub. Its core is 8 BM1370 ASIC chips. Unlike those 3000W industrial miners that roar like helicopters taking off, this little gadget's engineering philosophy is clear: find a balance between efficiency and home-friendliness. It uses a 6-layer reinforced PCB board—this isn't a gimmick. At high-frequency operations like 10 TH+/s, signal integrity directly determines whether your machine runs stably 24/7 or drops offline for an hour every day. Paired with a 1.9-inch ISP color display, this is crucial. You don't need to stare at a computer like a network administrator; a glance at the IP backend shows chip temperature, real-time hash rate, and power consumption—everything under control.
Core Features of Zyber 8G: (In 2026, the BM1373 Solo Miner will debut!)
- Extreme Energy Efficiency Ratio: 180W power consumption delivers 10 TH+/s (can be further boosted via OC), setting the standard threshold for home miners post-2025.
- Open-Source Firmware: Based on AxeOS, zero learning curve for geeks familiar with Bitaxe and Nerdqaxe, offering high playability.
- AxeOS-Based User Interface: Bitaxe and Nerdqaxe users can get started effortlessly (same system family).
- Dual-Phase Power Supply: Ensures stable and reliable performance under heavy loads, providing a 12V-20A laboratory-optimized power supply.
- 6-Layer Reinforced PCB: Minimizes interference and enhances signal stability.
- 1.9-inch ISP Color Display: Easily monitor mining activities in real-time, including temperature, hash rate, and power consumption.
- Hybrid Cooler: A dual-fan cooling system with advanced copper-aluminum alloy heatsink and optimized airflow design for more effective temperature reduction.
- 2OZ Copper: 75μm (2OZ) full-coverage copper layer, enabling instant heat dissipation from the copper layer to metal via direct-contact cooling technology with precision-milled PCB openings.
- Premium Cooling Upgrade Optional: 6-heatpipe industrial-grade copper-aluminum heatsink paired with dual FDB-bearing fans, delivering up to 72.68 CFM airflow at an ultra-quiet 36dB noise level.
- Free Bonus: High-quality acrylic stand with a 3D-printed base for stable placement and easy handling without touching the cooler.
🕰️Zyber Miner History🔬
The Zyber Miner didn't appear out of thin air. Understanding its origins helps you appreciate how thoughtful its current design choices are!
Behind the Zyber series lies the ingenuity of TCH's hardcore geeks. Perhaps inspired by the global popularity of simple ESP Miners and USB Miners years ago, and later tempered by classic projects like Bitaxe and Nerdqaxe, they kept pondering: Could top-efficiency chips like BM1368, BM1370, BM1373 be made into a truly complete, plug-and-play finished miner, rather than a DIY kit requiring user assembly!
| Release Time | Representative Project | Core Evolution |
|---|---|---|
| 2025 Q1 | Zyber 8S (8 x BM1368 Chips) | TCH's new series, hash rate in TH/s, prototype of a high-quality miner |
| 2025 Q3 | Zyber 8G (8 x BM1370 Chips) | Extreme overclocking, hash rate at least 10 Th+/s, plug-and-play |
| 2026 Q2 | Zyber Miner ? (BM1373 Chip) | Supernova explosion! Hash rate is about to break the limits of home solo miners!! |
Thus, the history of Zyber is an evolution of home mining from "hardcore ingenuity" to "DIY Solo Miner." Zyber 8S validated the Zyber series framework, while Zyber 8G innovated upon this mature framework, installing the latest BM1370 chips to complete the first performance iteration, with the next iteration perhaps arriving soon. It learned from the lessons of all previous projects. Unstable power supply? It comes standard with a laboratory-optimized 12V-20A power supply. Inadequate cooling? It directly employs a copper-aluminum hybrid cooler. This machine didn't appear suddenly; it evolved by stepping over the "corpses" of numerous DIY miners, aiming to achieve a truly high-quality miner.
🛒Buy Zyber ? Where🚀
This is probably everyone's biggest concern and the easiest place to stumble. From an official perspective, naturally, it's better to stick to the official channel: Tinychiphub.com. Of course, there are other partnered YouTube KOLs where you can get more discount codes to obtain high-quality, guaranteed solo miners at the most favorable prices.
- 🛑 Avoid Pitfalls: Referencing market prices, currently be wary of "brand new" machines priced significantly lower than the official website—they are likely problematic second-hand units.
- 🌍 Logistics Details: Remember to specify the power cord standard for your region, or wait for customer service to match it based on your shipping address.
- ➡️ TinyChipHub Official Site: https://tinychiphub.com/products/zyber-8g-10-th-asic-home-bitcoin-miner
Note: Don't gamble on luck with third-party platforms like eBay, AliExpress, or some unknown Southeast Asian sites. Why so certain? Because this isn't just about whether your dollars go down the drain, but also whether your home's circuit breaker will trip.
For folks in North America or Western Europe, ordering directly from Tinychiphub has several hardcore reasons. Based on your shipping address, we provide free, automatically matched American, British, or European standard power cords. This is a huge safety advantage compared to buying adapter plugs yourself, especially for crypto mining devices running at 180W load 24/7. Secondly, reliable logistics and a 7-day refund guarantee—not every small workshop dares to promise that.
I've seen no less than ten cases of counterfeit miners in the Discord community, all because people tried to save money buying so-called "❌️Bitaxe Supra Hex 703" on second-hand platforms, only to receive the wrong model of pirated miner. The Zyber Miner is a handcrafted DIY product; quality control entirely depends on the seller's conscience. TinyChipHub's product page openly states, "Based on open-source firmware, hardware is closed-source to prevent individual shoddy manufacturing." This level of transparency is already sufficient. Other companies can also achieve the goal of open-source hardware by obtaining the Zyber Miner, preventing low-quality miners from flooding the market and contradicting TinyChipHub's original intention!
Match Zyber! Power Supply🔌
The laboratory-optimized power supply is the most special aspect of using the Zyber Miner. Never think you can just plug in any random 12V power supply and be done—that disrespects your investment. Before that, it's best to check the Zyber Miner User Guide. The official 12V-20A laboratory-optimized power supply + XT60 connector that TinyChipHub includes as standard is absolutely not comparable to some surveillance power supply dug out of your junk drawer. Its internal ripple suppression is top-notch—the secret to ASIC chip longevity.
Since you've chosen a geek-spirited machine like Zyber, not tinkering with the power solution would make you itch. Especially when you want to overclock or pursue ultimate 24/7 stability, the official power solution is definitely the first choice, though at a higher cost, pushing power consumption higher, for example, using a Mean Well power supply to achieve higher hash rate overclocking.
Why do this? Because even the best power adapter will see conversion efficiency drop under prolonged full load due to heat accumulation. Here's a breakthrough point: the Zyber 8G Premium miner has a cooling margin 4~5 times that of the adapter, so even with higher hash rates, you don't have to worry about stable 24/7 operation.
Note the Zyber 8G actual test data:
- Original cooling version tested under OC mode: ASIC temperature 45-55°C at 26°C room temperature & 85% fan speed; ASIC temperature 55-65°C at 32°C room temperature and 100% fan speed.
- Premium cooling version tested under OC mode: ASIC temperature 45-53°C at 32°C room temperature and 60% fan speed.
The purity of power supply multiplied by cooling redundancy—this is the true complete form of the Zyber 8G. Your goal isn't to save trouble, but to create an artwork that can quietly and stably output hash power continuously for years to come.
