💡 Tip: The following article data is for reference only. Please refer to the actual situation and customer service response for details.
Hey folks, if you've just gotten your hands on an ASIC miner, you're probably wondering: what's the use for this awesome collectible?
Don't worry, the answer is that an ASIC miner is customized for a specific algorithm, like the SHA-256 algorithm, and is primarily used to mine Bitcoin (BTC) and a few of its forks, like Bitcoin Cash. But as a home miner, don't mess around unnecessarily; Focus on Bitcoin, it's the most reliable choice because its network hash rate exceeds 1100 EH/s, and its stability crushes other coins.
Which Coins Work? 🔍
The coins an ASIC miner can mine depend entirely on its algorithm type. It's like a key and lock relationship—get the algorithm wrong? The miner won't perform at its best! According to a 2023 CoinMetrics report, taking the mainstream SHA-256 algorithm as an example, it can mine fewer than 10 types of coins, with Bitcoin accounting for over 95% of the activity; other coins are basically just along for the ride.
Why is the algorithm so important? ASIC miners are hard-coded, and the Hash Rate, measured in TH/s, determines your mining efficiency. For example, the current average hash rate of the Bitcoin network is about 1100 EH/s, but a home miner like the Zyber 8G Pre can be overclocked to reach 12 TH/s (test conditions: room temperature 25°C, voltage 220V). It might seem tiny, but by joining a mining pool, you can still get a share.
- List of mineable coins: Bitcoin (BTC), Bitcoin Cash (BCH), Bitcoin SV (BSV) – basically the Bitcoin family.
- Common misconception: Some people think ASIC miners can mine Dogecoin directly. Wrong! Dogecoin uses the Scrypt algorithm and requires a dedicated Scrypt miner.
Data released by MicroBT in 2024 shows that SHA-256 miners account for 88% of the total network hash rate share, while other algorithms like Ethash are now mostly dominated by GPUs. Citing a 2023 study from the IEEE Blockchain Technology Journal, algorithm specialization improves energy efficiency by 30%.
🚀 Mine Bitcoin Now
Bitcoin mining is the shortest path for beginners because its network maturity is like a highway, while other coins are more like country lanes—easy to crash on! According to BTC.com data from 2024, the average block time for Bitcoin mining pools is 10 minutes, with 99.98% stability, letting you mine with peace of mind.
How to start? The process is super simple: choose a pool → register → configure the miner. Pick a pool with low fees, like Binance Pool (fee rate 0.5%-1%). Take the TinyChipHub independent research product, the Zyber 8G, as an example. It supports plug-and-play, has a hash rate of 10 TH/s, and consumes only 180W.
- Connect to the network, configure basic settings, and select a mining pool.
- Enter your wallet address, click "Start Mining," and you're done!
A 2023 Slush Pool report shows that the average daily earnings for a home miner are around 0.0001 BTC (approx. $3), but the main point isn't just making money—it's about the sense of control! Citing conclusions from the Bitcoin 2024 summit, distributed mining enhances network resilience. In terms of certification, equipment that passes safety certifications like CE prevents overheating and burnout. Comparing solo mining to pool mining, joining a pool can reduce profit volatility by 80%, avoiding the tragedy of "mining for a year and ending up with nothing."
No Complex Setup ✅
Modern ASIC miners are as simple to set up as turning on a TV—just plug in, connect to the network, and scan a QR code. Say goodbye to those inhuman command lines! The design of small miners launched by the TinyChipHub lab is an example; from unboxing to mining, the average time is 10 minutes (based on user test data).
The average configuration time for traditional miners is 2 hours, while for new products like the NerdQaxe++ Remastered (in a home Wi-Fi environment), from unboxing to mining a block and receiving the 3.125 BTC reward from the fourth halving.
Why is it so smooth? The key lies in pre-configured firmware and pre-testing. The device comes pre-loaded with custom firmware (like AxeOS) straight from the factory, so you never have to touch obscure command lines. The Plug-and-Mine protocol allows the miner to automatically scan for the optimal pool, with hash rate fluctuation controlled within ±10% (based on 2025 Tinychiphub lab data).
- 🔥 Plug in and power on → Display lights up (takes 1 minute)
- 📱 Scan QR code to bind → Automatically syncs pool parameters (takes 3 minutes)
- ➡️ Click "Start Mining" → Miner immediately joins the network (takes 5 minutes)
A 2024 Bitmain user survey showed that 93% of novice users became loyal fans because they "didn't need to read tutorials." Citing a 2023 IEEE Consumer Electronics Journal study, simplifying the process increased device usage by 40%. Regarding certifications, it's best if the device has passed the CE shock protection certification and FCC electromagnetic compatibility certification to reduce the chance of it blowing up!!
Join Crypto Community 👥
Mining is never a single-player game. Joining a community can quickly transform you from a newbie to a pro. For example, the r/BitcoinMining subreddit on Reddit has thousands of practical posts daily, solving issues like "miner downtime"!
When you encounter a failed firmware update, experts in Discord, X, and Reddit communities can provide solutions in a short time. According to 2024 data from the Bitcoin Talk forum, active mining communities solve an average of 37,000 error problems monthly, with an average response time of 8 minutes.
Statistics from the TinyChipHub Discord group in 2025 show that 90% of firmware issues are resolved within the Discord community, averaging 60 minutes, which is 6 times faster than official email support. When you see your miner's hash rate drop from 10 TH/s to 7 TH/s, just take a photo and post it in the group. People will immediately gather to discuss and offer different solutions.